Europly™ Panels -
feature certified construction in accordance with Forest Stewardship Council (FSC) ecolabel and solid 60% birch and 40% alder veneer core for superior strength vs. 100% alder construction. Its tighter thickness tolerance assures accurate, efficient production and the high-contrast plies give a uniform decorative edge. Europly is high-density, virtually void-free construction results in lower reject rates, consistent cutting performance and increased screw holding capacity.

Europly is available with a variety of hardwood veneer face and back combinations including: Afomosia • Alder, Red • Anegre • Ash, Olive Burl • Ash, White • Beech • Birch, Natural • Birch, Red • Birch, White • Cherry • Chestnut • Cypress • Elm • Fir, Douglas • Hickory/Pecan • Lacewood • Mahogany • Maple, Birdseye • Oak, Red • Oak, White • Peadwood • Pine, Clear White • Pine, Knotty • Poplar • Redwood • Rosewood • Sapele • Sycamore • Teak • Walnut • Yew, English • Zebrawood and a wide range of other species.
Widths x Lengths: 48" x 96"
Thicknesses: 1/2" - 9-ply, 3/4" - 15-ply and 1-1/4" - 23-ply

Baltic Birch -
100% birch plywood made with one-piece face, back and inner plies that stand up under great stress and strain. It has tremendous tensile strength and screw-holding power, yet machines easily and is not tough on tools. Fasteners can be driven close to the edge without danger of splintering.
Widths x Lengths: 60" x 60" and 48" x 96"
Thicknesses: 1/8" - 3-ply, 5/32" - 3 or 4-ply, 3/16" - 4 or 5-ply, 1/4" - 5-ply, 3/8" - 7-ply,
1/2" - 9-ply, 5/8" - 11-ply and 3/4" - 13-ply

Face Grades:
B - Selected one-piece face generally light and even in color. Occasional small pin knots and some brown streaks may be allowed. Intended for natural finish. No patches allowed. The majority of Grade B veneers are the equivalent of American one-piece select White Birch faces.
BB - One-piece face generally light and even in color. Occasional sound tight knots are permitted but open knots and defects in BB face veneers have been cut out and replaced with small ovular or round veneer patches before gluing. The veneer selected for patches is of the some general color as the basic face veneer. This grade is intended for use as face veneer for drawer bottoms, case backs and as a core stock for veneering or laminating. Generally there are very few patches per face and many users purchase this grade for cut up for natural finish.
CP - One-piece face and very close to grade BB in quality. Occasional hairline splits are allowed in grade CP. The ovular or round patches may or may not be matched for color with the base face veneer. There may be more patches per face than grade BB. This grade being quite close to BB is used in general for the same end uses including drawer bottoms, case backs and core stock.

Panel Grades:
B/B - This grace has a B face and a B back and accordingly is good two sides with one piece uniform light patch-free face and back.
B/CP - This grade has a B face and a CP back and accordingly has a uniform light one-piece face and a sound CP back.
BB/BB - this grade panel has a BB face and a BB back. Both faces and back are accordingly one-piece, generally light in color with occasional ovular or round patches. This panel is used extensively for cut up.

Other combination of face and back grades available.


All stock and special orders, available cut to specifications, with or without edge banding.